Aqara Zigbee Hubs and Their Differences

When I first started this website back in April 2018, the Aqara hub didn’t exist, and although Xiaomi hubs that look similar to the current Aqara hub had been around for a while, they weren’t HomeKit compatible, at least not officially. Hubs aren’t new of course, as the 2nd gen Philips Hue Bridge, also a Zigbee hub, has already been around for a few years. Aqara’s first own-brand hub came out in China in August 2018 and has been slowly but surely propagated to other regions. Unfortunately, the UK & Eire are still a little left out in the cold at the time of writing, but I’m hoping that’ll change, as other newer Aqara hubs start their steady emergence into the public.

While many people who regularly visit this site along with various social media platforms will be cognizant of Aqara, its hub, child devices, and ecosystem, the reason for this article is to help the growing number of people that are getting into smart homes in general, and HomeKit in particular, who may have been hearing the word ‘Aqara’ (including all of the various ways it’s pronounced) bandied about. They then find themselves waist-high – metaphorically speaking – in all the different options that this system offers, as well as hearing mention of ‘other’ hubs that they can’t as of yet find. This inevitably leads to a lot of confusion, and in many cases, hard-earned money unwittingly misspent on the wrong devices. So today, whilst it would take too long to cover the all of the differences between each hub, I hope to put newcomers straight on what each one is capable of, what they can and can’t do, as well as save you time on looking for a device that may not actually be designed for the region of the world you live in, if indeed you can find the device you want so badly.

For those that are more familiar with Aqara and the devices that can be used, there’s always the question of what devices are exposed to HomeKit. This was easy when there was only the one Aqara hub, but when it comes to certification for exposing devices to HomeKit, even if a sensor or smart plug has been certified to work with HomeKit via one hub, as soon as a new hub comes out, when it comes to these certified child devices going through the new hub, they have to go through the same certification process again, even when the new hub is itself already HomeKit compatible. Inevitably, these can lead to yet more confusion, where an Aqara US smart wall switch is compatible with the Aqara hub but isn’t yet exposed to HomeKit via the hub portion of the Aqara G2H camera, for example. There’s no easy way around this, and certification, even with devices already previously certified, is seemingly a length process. With this in mind, it’s impossible for me to be able to let you the reader know exactly what is and what isn’t currently exposed to HomeKit (the exception being the original Aqara Hub), as I’d first have to own each device in order to check this (not going to happen), and it’s entirely possible that no sooner do I leave something off a list, that a week later, it gains HomeKit compatibility. I hope you can appreciate this limitation I have to put on myself, but with help from other Aqara users, maybe we can amongst us confirm all of the devices across all of the hubs, in order to know for certain.

Some will read this article and be familiar with the parts I touch upon already, so in many ways, this is more for the beginner, confused about the variety of options out there. You can also check out the video below, that merely scratches the surface with the differences between the hubs if that’s an easier way to start off.

I will include a hub that isn’t part of the Aqara ecosystem, only so as to explain its relationship with the Aqara products, but first off the bat, all except one of the hubs I’ll mention are Aqara branded, with the one non-branded hub still both made by Aqara’s parent company (Lumi United), and also being capable of working with many of the same Aqara sensors and switches that the Aqara hubs work with. One thing to also note is that it is recommended that you buy a hub suitable for your region if at all possible, for the best support, compatibility and usage. Take a deep breath, and jump in…

 ProtocolChild devicesZigbee 3.0?PowerregionsAlarm modesSpeaker?LED light?Extras
Aqara HubWiFi 2.4GHz32NoBuilt-in plugCN / EU / US / HKAway / OffYesYes-
Aqara Hub M1SWiFi 2.4GHz128YesBuilt-in plugCNAway / Home / Sleep / OffYesYes-
Aqara M2WiFi 2.4GHz / Ethernet128YesUSBCNAway / Home / Sleep / OffYesNoIR transmitter
Aqara P3WiFi 2.4GHzunknownYesBuilt-in plugCNAway / Home / Sleep / OffYesNoIR Transmitter
Aqara G2HWiFi 2.4GHz64YesUSBCN / EU / USn/aYesNoCamera
Mijia Smart GatewayWiFi 2.4GHz128YesUSBAll regionsn/aNoNoBluetooth/Mesh gateway


  • Uses WiFi 2.4 GHz to connect to your network/HomeKit
  • Can support up to 32 child devices
  • Uses Zigbee to connect to child devices (not Zigbee 3.0)
  • Uses a built-in plug
  • Available in the following variants, with the appropriate type of plug;
    • China (Type I)
    • Europe (Type C)
    • North America (Type B)
    • Hong Kong/U.K. (Type G plug, but not officially on sale in the U.K.)
  • Works with Apple Home, Mi Home, and Aqara Home apps
  • Two alarm modes – Off and Away (currently not synced with HomeKit)
  • Includes audio speaker (for alarm) and LED ring light

This is the hub that started the ball rolling for Aqara, even though their child devices had been available to buy before this hub existed, which were designed to work with the non-HomeKit Xiaomi – or Mijia/Mi – Hub.

first off, if you find a hub that looks similar to this, but doesn’t have the Aqara logo in the centre, then it’s not the Aqara hub, so don’t waste your money on something that’s not going to be HomeKit compatible. There are two hubs that look vaguely similar to the hub pictured above but are going to have the MI logotype or the Mi ‘Shield’ logo, which comprises stylised versions of the letters M and J.

That aside, what’s the deal with the Aqara hub? Well, it’s a hub that uses WiFi to connect to your network, and by extension, connect to your HomeKit home. The Aqara hub comes with a HomeKit QR code, so it can be added to HomeKit directly, although it’s advisable to add it to the Aqara Home app initially. When in HomeKit, the device will be exposed to HomeKit as two ‘services’; a light, which is the LED ring around the centre of the hub, and a security system, which in terms of HomeKit, simply allows the built-in alarm to be armed or disarmed.

To slightly complicate matters, the Aqara hub can be added to either the Aqara Home or Mi Home apps – but not both. Generally, I’d recommend you use the Aqara app, although if you’ve been using Mi Home for a variety of Xiaomi smart home products like fans, air purifiers and Bluetooth sensors, then you may want to keep using Mi Home. either way, it’ll be exposed to HomeKit. When you’ve added the device to either app, you can begin to add what are often referred to as ‘child devices’. These are Zigbee devices that need a hub, both to operate and to expose them to HomeKit (in almost all cases with Aqara products). You typically add these devices in the Mi Home or Aqara apps, whereupon you’ll be asked to choose your hub in order to add them. Child devices include a variety of sensors, buttons and switches.

The Aqara hub is capable of supporting up to 32 child devices and uses an older version of the Zigbee protocol, with Zigbee 3.0 being the latest official build. The hub only supports Zigbee devices, so you can’t add Bluetooth or WiFi devices to it. Many times people have asked if they can add their Xiaomi Bluetooth temperature sensor or a Yeelight bulb to the hub, and it’s a simple ‘No’. They can work together in automations, but the hub is simply not capable of supporting either of these protocols in the manner of a hub.

Whilst the Aqara app only lists its own brand child devices when adding them, many of the equivalent Mi/Mijia Branded sensors, buttons and switches also work with the Aqara hub, which can be seen if you’re using the Mi Home app. If you want to know what Aqara or Mi branded devices the hub currently supports, you can check out our Aqara 101 article HERE although it probably needs an update.


  • Uses WiFi 2.4 GHz to connect to your network/HomeKit
  • Can support up to 128* child devices
  • Uses Zigbee 3.0 to connect to child devices
  • Uses a built-in plug
  • Currently only available in China, with Type I plug
  • Works with Apple Home, Mi Home, and Aqara Home apps
  • Four alarm modes – Off, Away, Home, Night/Sleep (syncs with HomeKit)
  • Includes audio speaker (for alarm) and LED ring light

The Aqara Hub M1S is an upgrade to the current Aqara Hub, and looks identical, save for the newer Aqara logo on the front. Aside from the visual similarities, in many other ways, the M1S is the same as the original, but uses Zigbee 3.0, so it can use both the current child devices that use the previous iteration of Zigbee and newer child devices that use Zigbee 3.0 (generally dubbed T1 devices). The LED ring has been slightly upgraded, and the sounds on the hub are also slightly different, including the onboard voice prompts. As with the previous warnings about making sure you buy the Aqara hub, and not a Mi or Mijia hub by mistake, if you intend to buy the M1S, make sure it is the M1S, as it does look nearly identical to the older model, so double-check with the store you buy it from. Even though it’s currently only available with a Chinese plug (Type I), the M1S can be purchased from a variety of Chinese international online stores, including AliExpress and Bangood. In HomeKit, the M1S is exposed as a light, an alarm system, and a hub (within the settings of the Home app).

* The gateway can directly connect 32 Zigbee terminal devices. If you need to add more Zigbee sub-devices, you can add Zigbee relay devices to the gateway first, and then add Zigbee terminal devices. Relay devices have expanded functions; After expansion, the gateway can support up to 128 Zigbee sub-devices. Among the Zigbee products branded as Aqara or Mijia, the neutral wire products are ‘relay’ devices, and the battery-powered or non-neutral products are ‘terminal’ devices. Each relay device can be expanded to 16 terminal devices.


  • Uses WiFi 2.4 GHz or Wired Ethernet to connect to your network/HomeKit
  • Can support up to 128* child devices
  • Uses Zigbee 3.0 to connect to child devices
  • Includes an infrared transmitter to control IR-based devices (not exposed to HomeKit)
  • Uses a Micro-USB port in combination with any USB type power supply
  • Currently only available in China
  • Works with Apple Home and Aqara Home apps
  • Four alarm modes – Off, Away, Home, Night/Sleep (syncs with HomeKit)
  • Includes audio speaker (for alarm)

* The gateway can directly connect 32 Zigbee terminal devices. If you need to add more Zigbee sub-devices, you can add Zigbee relay devices to the gateway first, and then add Zigbee terminal devices. Relay devices have expanded functions; After expansion, the gateway can support up to 128 Zigbee sub-devices. Among the Zigbee products branded as Aqara or Mijia, the neutral wire products are ‘relay’ devices, and the battery-powered or non-neutral products are ‘terminal’ devices. Each relay device can be expanded to 16 terminal devices.

The Aqara M2 was announced in July of 2019 and has taken over a year to finally surface in China, although it’s still hard to find for some reason. The M2 is different from the two previously mentioned hubs – design-wise for the most part – although it’s still a Zigbee (3.0) hub. Aside from the design, instead of using a built-in plug for direct connection to a wall socket, the M2 uses USB, with a micro-USB port on the back, where you can use a Micro USB to USB cable, and connect it to a USB power source. This avoids the issue of regional plugs and the need for an adaptor. The M2 also has an ethernet port, so if you prefer a wired connection, and have a free port on your router, then this should provide an even more stable connection. It also supports 2.4GHz WiFi if you don’t have the wired option. In HomeKit, the M2 is exposed as a hub and alarm system.

Also included is an Infrared transmitter, which allows the M2 to act as a replacement for various IR remotes you may have dotted around the house, like ones for TVs, AC units, fans, games consoles etc. The IR transmitter isn’t exposed to HomeKit, as Apple’s smart home platform doesn’t officially support IR units with the exception of devices like the Tado Smart AC Controller V3+ (read our review HERE). However, you can control devices that are using the M2’s IR functionality, with the use of Siri Shortcuts in the Aqara Home app, so it’s the best you’ll get for now. As Aqara buttons, sensors and switches are compatible with both HomeKit and Aqara Home, you can, of course, programme any of these to trigger an IR function previously programmed, so for example, if you had an Aqara/Opple wireless switch, you could programme one of the buttons to trigger a HomeKit bulb, with another triggering a previously created IR function in the Aqara app.

The Aqara M2 also has Bluetooth 5.0, although there’s almost nothing mentioned about this in the literature, so rather than being a hub for Bluetooth devices, it’s more likely it’s only used for initial pairing of certain devices.


  • Uses WiFi 2.4 GHz to connect to your network/HomeKit
  • Can support up to 128* child devices
  • Uses Zigbee 3.0 to connect to child devices
  • Uses a larger, built-in 16A plug
  • Includes an infrared transmitter to control IR-based devices (not exposed to HomeKit, except for AC units)
  • Currently only available in China, with Type I, 16A plug
  • Works with Apple Home, Mi Home, and Aqara Home apps
  • Four alarm modes – Off, Away, Home, Night/Sleep (syncs with HomeKit)
  • Includes audio speaker (for alarm)

The Aqara P3 is first and foremost a sort of beefed-up smart plug, that allows you to also control the power to whatever’s plugged into it, although it’s specifically designed for wall-mounted AC units that require more power, using Chinese 16A plugs. These plugs are larger than the ones you typically find on lower-powered devices that come with a Chinese Type I plug. It essentially controls all of the main functions of your AC using a built-in infrared transmitter, to replace your standard AC remote. While HomeKit doesn’t support IR functionality, in the case of the AC, the P3 exposes your unit as a thermostat, so controls like heat, cooling and turning the AC on and off are available directly in HomeKit. Like the M2, the IR transmitter in the P3 can also be programmed to control other devices that use IR remotes, although they’re not exposed to HomeKit. The P3 shows up in HomeKit as a thermostat and a security system, as well as a hub, but only when you click on the settings for a child device using the P3 as a hub.

Just like all the other hubs I’ve mentioned, it uses 2.4GHz WiFi, and Zigbee 3.0 for child devices. There are two previous iterations of this device, but only the P3 is officially HomeKit compatible, so be careful if you’re considering buying this device, which, due to the larger and less common Chinese plug, is probably not recommended for use outside of Mainland China.


  • Uses WiFi 2.4 GHz to connect to your network/HomeKit
  • Can support up to 64* child devices
  • Uses Zigbee 3.0 to connect to child devices
  • Regional models supported in the following areas – China, North America, Europe
  • Works with Apple Home and Aqara Home apps
  • Includes audio speaker (for alarm, two-way audio)
  • Alarm functionality restricted to Aqara Home, not exposed to HomeKit
  • Available in White outside of China, and in Red, Blue, Yellow, or White for the Chinese model

* The gateway can directly connect 32 Zigbee terminal devices. If you need to add more Zigbee sub-devices, you can add Zigbee relay devices to the gateway first, and then add Zigbee terminal devices. Relay devices have expanded functions; After expansion, the gateway can support up to 64 Zigbee sub-devices.

The Aqara G2H is a combined HomeKit compatible camera and hub. In fact, the camera is also compatible with HomeKit Secure Video (HSV). The hub is also exposed to HomKit of course, which in turn allows compatible child devices to be exposed to HomeKit. In HomeKit, the G2H exposes two services – camera and motion sensor. It also appears as a hub, but only if you look into the settings for one of the child devices that connect to it. Furthermore, as a camera can’t be designated as a hub in HomeKit, the G2H’s hub service lists the Motion sensor as the hub in this instance.

While the camera can use HomeKit Secure video, it also has the option to record to an SD card that can be added to the camera, as well as cloud-based recordings via Aqara’s servers. These recording options can only be accessed via the Aqara app, and if you want to make use of them, you need to be signed into the Aqara app, with the camera ‘binded’ to the appropriate server. Under normal circumstances, you should also be signed into the Aqara app to add child devices to the G2H’s hub, although you can manually add devices outside of the Aqara app, with the use of the button on the top of the camera (three presses puts the G2H hub into pairing mode).

You can use a Chinese G2H even if you’re not located in China, but you do need to be signed into the Chinese server in the Aqara app in order to bind the camera fully to make use of the aforementioned additional recording options. This also means that if, for example, you’re in the US, with a Chinese G2H, signed into the China server, you can’t easily add a US Aqara wall switch, so it’s best to get the G2H for your region, for hassle-free service. Like the Aqara M2, the G2H uses a micro USB port for power, so you can use any suitable micro USB to USB cable along with a USB power source to power it.


  • Uses WiFi 2.4 GHz to connect to your network/HomeKit
  • Can support up to 128* child devices
  • Uses Zigbee 3.0 to connect to child devices
  • Acts as both a Bluetooth hub and Bluetooth Mesh hub for Mijia Bluetooth and Bluetooth Mesh devices
  • Uses a Micro-USB port in combination with any USB type power supply
  • Available with no regional restrictions
  • Works with Apple Home and Mi Home apps
  • No audio speaker, only a buzzer to confirm certain functions

The Mi Smart Gateway, also known variously as the Mijia Gateway 3, or the Mijia Multimode Smart Gateway, is not an Aqara product, although it’s made by Aqara’s parent company (Lumi United) for Xiaomi. As such, it is not compatible with the Aqara Home app, only Mi Home and of course Apple HomeKit. Like the Aqara M2, this uses a micro USB power connection, which makes using this in different regions easy, with a suitable USB power supply. Unlike all other hubs as part of the larger Xiaomi ecosystem, this is now region-free, so not only should you be able to buy these locally, but if you previously bought a Chinese model, that will now be usable in any region. Unlike the M2, this doesn’t come with an ethernet port, and neither does it have a speaker or LED light, so in this sense, it’s the most basic of hubs. However, it is Zigbee 3.0, and region-free, as already mentioned, so these could be seen as minor plusses compared to the original Aqara hub. Additionally, it can work with both Mi and Aqara branded sensors, although as with all hubs that have come after the original hub, you may find some devices have yet to be certified to be exposed to HomeKit. In HomeKit it doesn’t show up with its own tile, as there are no additional functions, like a light or security alarm, so you can only see the existence of this device in the ‘Hubs and Bridges’ section in the settings for the Home app.

Aside from the Zigbee 3.0 connectivity, the Mi Smart Gateway also acts as a Bluetooth hub for Xiaomi smart home devices that use Bluetooth. HomeKit compatible Bluetooth devices in HomeKit use either a direct connection to your phone or a Home Hub (Apple TV, HomePod/Mini, iPad). In Mi Home, Bluetooth devices also connect directly to your phone, but many Xiaomi smart devices also contain Bluetooth hubs, like some of their cameras, sensors or even ceiling lights. These allow those Bluetooth devices to be accessed remotely, as the devices that contain a Bluetooth hub invariably use WiFi. Not only does the Mi Smart Gateway fulfil this type of function, but it is also designed to work with Bluetooth Mesh devices in the same way. Bluetooth Mesh is similar to Zigbee, in that as you add these mesh devices to your home, the reach of the devices is expanded outward, like an ever-expanding fishing net, with each additional device relaying information back and forth, thereby removing the issue of a Bluetooth (mesh) device being out of range of either your phone or a Bluetooth mesh gateway. Yeelight makes a Bluetooth mesh gateway that also works with Apple HomeKit, but it works exclusively with its own range of Bluetooth mesh lighting products at present. This would be the same for the Mi Smart Gateway, although at present I’m not aware of any Bluetooth mesh devices that are designed to work with the Mi smart Gateway, much less whether they’re exposed to HomeKit. That said, Xiaomi has a series of Bluetooth devices coming out – motion sensor, contact sensor, and smoke sensor – that all use Bluetooth, so it’s possible that these are designed to work with the Mi Smart Gateway and from there (eventually) get exposed to HomeKit. It’s all a bit of an unknown at the moment though.

To wrap things up, as with any area of technology, as things improve, newer models come out, and hubs are not immune to this fact either. Aqara already have more hub-based devices on the way, including a wall outlet based hub, an LCD display wall mounted hub, and even a USB stick hub are all in the making, as was revealed in our post back in September, but that shouldn’t dissuade you from purchasing a hub now, as many of these upcoming ones won’t surface for a while, and even then only initially in Mainland China.

That’s everything I have to say on these different options for now, and I hope it’s of some use for those a bit lost and bewildered at the options out there, but if there’s something I missed, or there are further questions you have, feel free to drop a comment below.

The Editor

Editor - Musician, graphic designer and HomeKit aficionado.

36 thoughts on “Aqara Zigbee Hubs and Their Differences

  • 9th December 2020 at 9:00 pm

    I tried to move all of my aqara switches from 1st Gen Aqara Hub to G2H Hub.
    Aqara Wireless switches and Opple Wireless switches are immediately exposed to Homekit, but unfortunately wired Aqara switch with neutral is not exposed to Homekit. Very disappointing

  • 10th December 2020 at 8:32 am

    I have Aqara wall switch without neutral and very disappointing it’s not exposed to HomeKit by G2H hub.

    • 10th December 2020 at 8:34 am

      Is the G2H the US model? I’m sure they’ll add the switches at some point soon if it’s the US model. Possibly not if you’re using the Chinese model though.

    • 11th December 2020 at 11:36 pm

      The latest update for the G2H now supports the US wall switches and smart Plug.

      • 12th December 2020 at 1:37 am

        Thank you, I can confirm that the G2H supports no-neutral wall switch in HomeKit now. As soon as I updated firmware, the switch was visible in the Home app.

      • 6th January 2021 at 12:39 pm

        Is this only the US version of the G2H that supports the US wall switches and smart Plug?

        I have a Chinese version of the G2H, which I use in HomeKit-only mode (not signed into the Aqara app, not connected to any server (Chinese or US)), and I am wondering if it will support US wall switches and smart Plug and expose them to HomeKit?

        Thank you very much for the help!

        • 6th January 2021 at 2:14 pm

          In theory you should be able to add the US switches to the Chinese hub, by manually adding them; 3 presses on the button on the top of the G2H puts it in pairing mode. From there, you add the switch as you would normally, usually pressing and holding a switch down until a blue LED starts to flash, I believe. I have not tested this myself, so I can’t guarantee it’ll work.

        • 6th January 2021 at 11:20 pm

          I can confirm that it supports the switches. My G2H camera is the Chinese version, and after the latest firmware update, it supports bothe the US and the Chinese switches.

          • 7th January 2021 at 1:23 am

            Thank you Leonardo!

            To confirm, are you on firmware 2.0.9 for the G2H camera (I can’t update further because I have it in HomeKit-only mode).

            And is the switch you used the US Aqara Smart Wall Switch with Neutral, Single Rocker?

            Thank you again for your help!

          • 7th January 2021 at 7:29 am

            I’m actually on version 2.1.1_0002.0515. Version 2.09 did not expose the switches to HomeKit.
            I did use the single rocker US version with neutral. But most of my switches (29 of them) are the Chinese version, with neutral. The latest version of the G2H firmware exposed them all to HomeKit, and it works flawlessly.

      • 10th January 2021 at 12:14 am

        Hi again,

        I am wondering which Chinese G2H firmware version is the minimum required to support the US Smart Plug? (2.0.9? 2.1.1?)

        I am having trouble getting my new US Smart Plug paired with my setup :

        -Chinese G2H in HomeKit-only mode (never connected to any server), firmware version 2.0.9

        -US Smart Plug

        I tried pairing them by first pressing the button three times on the G2H, and then holding down the button on the Smart Plug for 5 seconds. Unfortunately it doesn’t work, and the Smart Plug is not paired and does not show up in HomeKit (Home app on iPhone).

        I am wondering if I need firmware 2.1.1 on my Chinese G2H? Unfortunately the firmware update is not currently available for the Chinese G2H if it is in HomeKit-only mode (a known bug that Aqara support have said they are working to resolve).

        If someone has a Chinese G2H on firmware 2.0.9 in HomeKit-only mode and has successfully added the US Smart Plug, I would love to know how, because otherwise it might indicate a problem with my US Smart Plug hardware (received it today), and then I will return it to the seller.

        Thank you!

  • 10th December 2020 at 9:54 am

    I’ve had a similar experience as Ken’s and Vega’s. The first devices I’ve bought were the G2H and a couple of switches with neutral (everything from China). However, the switches were not exposed to HomeKit. Afterwards, I bought the M1S hub, and immediately everything was exposed to HomeKit. It was really worth buying the M1S. Since everything works perfectly now, I’ve decided to buy 29 switches and several sensors for my new home. I just hope that all this investment doesn’t go to waste once Thread devices start popping out.

    • 10th December 2020 at 9:56 am

      I think Zigbee will be here for a long time to come, but even then it’s reported that updating Zigbee to work with Thread is not difficult.

      • 10th December 2020 at 10:22 am

        I really can’t imagine it being difficult. However, I think it’s highly unlikely that Aqara or other manufacturers would bother with an update. It’s more profitable for them to launch new products, rendering previous ones obsolete.

  • 14th December 2020 at 1:54 am

    Extremely disappointed in the Aqara Hub (US version). Was looking forward to integrating this into Home Assistant to use the lights and sounds in my alarm system. It installed easily into Home Assistant via Homekit. But only the light works, no sounds.

    I’ve searched high and low across the internet. Everyone having the same issue, Lights are on but no sounds. Everyone says to upgrade to version 3 Gateway. Not going to do it. Version 3 has no lights and is a beeper. Worthless.

    Going to return it on Monday. I hate I paid good money for a winky light with no sounds.

  • 22nd December 2020 at 5:37 pm

    Hi have Mi smart gateway and the old aqara hub. When I try to add opple 6 buttons switch to Mi smart gateway it works but I can’t find it in homekit. When I add the same switch to the old aqara hub it appear in homekit.
    I don’t understand why… I have other device connected to Mi smart gateway that appear in homekit like aqara temperature or dors sensor.

    Do you know why?

    • 22nd December 2020 at 5:45 pm

      Even though each hub that work with HomeKit has been certified, every child devices that goes through these hubs has to also be certified by Apple to be exposed to HomeKit. Even if a child device has already been certified to work with one hub, for every hub that it’s designed to work with, it has to be certified by Apple again. As the hub is by Xiaomi, but the button is Opple, it’s unclear who’s responsible for getting it certified. Either way, without certification for the relevant device going through a specific hub, it won’t be exposed to HomeKit. Opple and Aqara worked together on the switches and ceiling lights, so they ensured it the Opple devices would be exposed to HomeKit via the Aqara hub, but for each new Aqara hub (M1S, M2, P3 etc) the Opple switches will need to be certified all over again.

  • 3rd January 2021 at 12:45 pm

    Eu gostaria de saber se nesse novo Aqara Hub M1S está dando a opção de acesso ao Hub alto-falante para acionar o alarme? Eu tenho o Aqara Hub de primeira geração, onde apesar de poder ligar ou desligar o alarme através da Apple Home, não consigo criar uma automação para acionar a saída de som pelo som do Hub.

    Percebi que aqui nesta matéria, que você mostra que em alguns modelos de hubs tem a sincronização do alarme com o HomeKit e que em outro não. Sabe me dizer o que que realmente muda de um para o outro ?

    • 3rd January 2021 at 12:51 pm

      Olá, o Aqara M1S dá a você acesso para controlar todos os quatro modos de alarme nos aplicativos Aqara e HomeKit, e eles sincronizam entre os dois aplicativos. você só pode escolher um dispositivo de disparo de alarme que funcione com o hub, então você não pode usar um sensor de movimento de outras empresas de HomeKit para acionar o alarme no M1S. você só pode usar sensores da marca Aqara ou Mijia para fazer isso. você também deve configurar o processo para os diferentes alarmes no aplicativo Aqara.

  • 5th January 2021 at 7:29 am

    Hi, thank you very much for this extensive comparison, both the article and the video. However, maybe you could add “Bluetooth” to the comparison matrix with the six hubs. Although not always important, it does make a difference for some. There are a lot of interesting Bluetooth Xiaomi accessories that can communicate with the hub to store historical data, to synchronize for other reasons or to make the device available remotely.

    • 5th January 2021 at 7:34 am

      Hi Dennis, the reason I left out Bluetooth in the comparison is that so far, only the Mi Smart Gateway offers this function actively (the M2 has Bluetooth but there are no devices so far), but none of the Bluetooth devices that work with the gateway are exposed to HomeKit. If this changes, I’ll definitely add this aspect.

  • 28th January 2021 at 2:28 pm

    Thank you for all this info!
    I just recieved my Xiaomi V3 Gateway…. Early…… so I am waiting for several delivery of different devices such as the the 6 button Opple Wireless switch and several of a couple different bluetooth temp sensors…. and the V2 BT Nightlights…. and with I’m not confused on what will work with Homekit…. does adding a G2H or Aqara hub make difference on what can be exposed to Homekit?

    • 28th January 2021 at 2:38 pm

      Hi, there are probably more devices exposed to HomeKit via both the G2H and the Aqara hub, than via the Mi Smart Gateway. If you want to use the Aqara hub, that will work with Mi Home and Aqara home apps, but the G2H only works with Aqara home.

      • 28th January 2021 at 3:04 pm

        But Aqara Home works with both Hubs correct? I also have Homebridge and I know I can expose the Bluetooth Hygrometers to HK with that…But which hub/app will work the Opple switches? I just hate to buy another hub but if more devices are HK compatible without Homebridge it might be worth it….

        • 28th January 2021 at 3:07 pm

          You can’t add the Mi Smart Gateway to aqara home, only Mi Home. The Opple Switches will work with both Hubs, and are exposed to HomeKit via the Aqara hub. I’m not sure if the Opple switches are exposed to HomeKit via the Mi Smart Gateway.

          • 28th February 2021 at 7:14 am

            Hi Simon I can confirm the Opple six button wireless switch will work with the V3 Gateway but doesn’t expose it to Homekit as it does with the Aqara hub.

          • 28th February 2021 at 8:51 am

            Ok, thanks. When the Mi Smart Gateway first came out, the Opple Switches were not exposed to HomeKit, but I was hoping that would eventually have changed. Certification of these devices seems to be the responsibility of the manufacturer of the Child device, as opposed to the responsibility of the hub manufacturer then.

  • 28th January 2021 at 4:05 pm

    Thanks I’ll let u know when I receive the Opple switches if they work with the V3…then we’ll see if I need an Aqara hub….

    I meant both hubs work with Mi home… LOL it gets confusing…

    • 28th January 2021 at 4:08 pm

      Yes, it’s hard to keep track of what works with which app, add what’s exposed to HomeKit.

  • 5th February 2021 at 2:30 pm

    HI! So I’m still waiting for my Opple switch.. but I got an Original Aqara hub and a few devices to play with in the meantime. SO I’m having issues with it…I added the Aqara hub to Mi home as thats where my V3 Xiaomi gateway and a few BT Temp/Humidity sensor I already have are…it took a couple tries to connect to Wifi…Asked to bind to HK and completed setup with the Light Ring and security showing in HK…. Then that’s it…. The Aqara hub shows in HK but is nowhere to be found in the Mi Home app…so I can’t add child devices to it…. I’m stuck… Even Though everything I have seems to connect to the Xiaomi gateway, I would still like to have the Aqara hub work.

    Can you provide any advice or direction?

    Thanks again for your help!

    • 6th February 2021 at 8:17 am

      Hi Miles, sorry for the late reply. First questions I need to ask is which region is your hub (Chinese, EU, US) and which server is your Mi Home app set to?

      • 6th February 2021 at 12:18 pm

        No worries! Thank you the reply! From what I understand…. my Aqara Hub is US… my Mi home app is set to China Mainland. (Because my BT Sensors seems to only show on the Chinese server)

        • 6th February 2021 at 12:19 pm

          Actually I’ve been replying to your post on Facebook in the Aqara smart home group, so I think we covered a fair bit.

          • 6th February 2021 at 4:22 pm

            Simon? LOL I had no idea! I was reaching out on all channels so that’s hilarious! I just joined that group! Cheers!

  • 28th February 2021 at 9:12 am

    Yes it’s frustrating as these are the only devices I currently own that I must rely on the Aqara hub for Homekit support …. and I do not like the fact that the Aqara hub hijacks the security status of Homekit and there is no way to way to disable or exclude it when using another security panel/alarm in Homekit. That all being said I see a firmware update available for for V3 Gateway that might change things however I am hesitant to update as I fear compatibility issues if I was to try something like Mi-connector in the future.

Comments are closed.